COOSPIDER
COOSPIDER Sun JUP-01 Aquariums in Tank Submersible Machine 211Gph 9 Watt Fit for 80Gallon (JUP 01 Set + 2X Replace Filter + 1X Spare Bulb)
COOSPIDER Sun JUP-01 Aquariums in Tank Submersible Machine 211Gph 9 Watt Fit for 80Gallon (JUP 01 Set + 2X Replace Filter + 1X Spare Bulb)
Couldn't load pickup availability
- 【Important Note】After receiving the product, must remove the shock-proof sponge inside the product before using it. (For detailed steps, please refer to the third product picture in the product page.)
- 【Warm Prompt】Since this product contains a small motor to drive the water circulation, there will be a loud motor idling sound when running without water, but once it is placed in the water, the sound will disappear. In addition, in order to ensure the best performance of the machine, we have checked all the machines (in water) before shipment, so after receiving the machine, it may be wet inside, please do not worry, it is brand new.
- 【Product Detail】Size: 3.5" L X 3.9" W X 12" H, Cord: 4.6ft., Flow rate: 210 gallon per hour, suitable for 40-80 gallon tanks. Four-in-one: water pump(adjustable) + air pump + filter + clean, can be directly used in the fish tank without other connection requirements.
- 【Warm Tips】In order to maintain the best cleaning effect, it is recommended to check the machine every 1-2 weeks: open the casing, 1. clean the filter sponge, 2. check whether the bulb works well, 3. check whether water enters the quartz sleeve, due to the bulb generates heat during operation, it may cause slight water into the quartz sleeve after long-term use. If there is a slight water into the sleeve(which does not affect the bulb, just drain the water).
- 【1 Year Warranty】If any questions or problems, please contact the service mailbox on the package, we will solve and reply in 24 hours.
Product Description
How to use this machine?
- How can I place it?
The entire pump body must be completely submerged in water.
(It is recommended to place it vertically. If it is really hard to install, you can rotate it or place it horizontally, but make sure that the entire machine is submersible.)
- How long should I use it?
It is recommended to use it continuously for a few days for the first use. In most cases, you will see the water starts changing after 1-3 days (it depends on the size of your fish tank and water quality).
Keep the machine work until the water becomes completely clear, then you can use it for 2-4 hours a day to maintain the good condition of the water.
Tips: If the water in your fish tank is only turbid/green, you can use this machine directly, but if the algae in your fish tank grow and fix on the decorations or other places, you need to remove the fixed algae first, then use this machine, the water will remain clear in the future.
Product Specifications
- Size: 3.5" L X 3.9" W X 12" H
- Cord: 4.6ft.
- Flow rate: 210 gallon per hour
- Suitable for: 40-80 gallon tanks
|
|
|
|
|
|---|---|---|---|
Air Inlet PipeHang it outside the aquarium, unscrew the air valve, you will get a lot of bubbles to increase the oxygen in the water. Tighten the air valve, there will be no bubbles. | Adjustable Water OutletYou can adjust the direction of the water outlet according to your needs. | Shock-proof RubberIt's used to prevent the bulb from breaking during transportation. Take it out or not is both ok, it will not have any impact on the use of the machine. | For Fresh Water/Salt WaterThis machine can be used in both fresh water and saltwater. |
Keep the water clear
Use for muddy water/ green algae boom
